KP3005A Ion Air Gun
Model：KP3005A
application area
Product overview
KP3005A ion air gun is a hand-held electrostatic and dust removal device developed and produced by Kapal Company to eliminate static electricity and dust on the surface of objects. Requires compressed air and high-voltage power supply.
The KP3005A ion air gun can generate a large amount of airflow with positive and negative charges, which is blown out at a high speed by the compressed air, which can neutralize the charges on the object. When the surface of the object is negatively charged, it will attract the positive charge in the airflow. When the surface of the object is positively charged, it will attract the negative charge in the airflow, so that the static electricity on the surface of the object is neutralized and eliminated. purpose of static electricity.
KP3005A ion air gun is widely used in plastic spraying, electronics, LED optoelectronics, printing, pharmaceutical and other industries.
Product features
* The air volume is concentrated, and the static electricity is quickly neutralized.
* Small size, portable operation.
* Good dust removal effect.
* The air gun comes with a regulator, which can adjust the air pressure arbitrarily.
* The air gun has a good grounding protection function.
Technical parameter
Operating Voltage | AC 4.6KV |
working distance | 150-300mm |
Air supply connector | Ф8mm（Customized according to customer requirements） |
Ion balance | ≤|±35V|（300mm from the front test center of the air gun） |
Power down time | ≤1S（300mm from the front test center of the air gun） |
use medium | clean compressed air |
Operating temperature | 0℃-50℃ |
Working humidity | ＜75% |
High voltage wire length | 2.8M（Customized according to customer requirements） |
compressed air pressure | 0.3-0.8Mpa |
Air velocity | 3-10m/S |
noise | ≤65dB |
Ozone concentration | ≤ 0.03 ppm （150mm from the front center of the air outlet） |
Gross weight | About 0.6kg (including 3M high-voltage wires) |
Configure Power | KP4001A |
Test result
Test Conditions | ||
Humidity: ≤60% Test voltage: 1KV-100V Ambient temperature: 22℃ | ||
distance | 300mm | |
Neutralization time | just | 0.7s |
burden | 0.8s | |
residual voltage | ≤±30V | |
* The test results of the test instrument using ME268A electrostatic comprehensive tester shall prevail.
* Tested according to IEC-61340-5-1 A·6.
* Tested data may vary due to changes in ambient temperature and humidity.